3-D Interfaces

Drawing > New/Open > Open > 3-D Import

HiCAD supports 3-D formats as follows:

Format		Import	Export
3D PDF	.pdf	✘	✓
Universal 3D	.u3d	✘	✓
Product Representation Compact	.prc	✘	✓
Kisters Viewstation	.3dvs	✘	✓
SketchUp	.skp	✘	✓
STEP	.stp, .step	✓	✓
STL	.stl	✓ binary/asciii	✓ binary/ascii
VRML	.wrl	✘	✓
ACIS	.SAT	✓	✓
CADENAS	*.lst	✓	✘
CATIA V4	.MDL, .Model, .EXP, .ISO, .DLV3	✓	✓ only .Model
CATIA V5	.CATPart, .CATProduct	✓	✓
AutoCAD DXF/DWG	.dxf, .dwg	✓	✓
IGES	.igs, .iges	✓	✓
IFC	.ifc, .ifczip	✓	✓
Inventor	.ipt, .iam	✓	✘
JTOpen	.jt	✓	✓
Parasolid	.x_t, .xm_txt, .x_b	✓	✓ only .x_t
PRO/E, Creo Parametric	.prt, .g, .asm	✓	✓ only .g
PLMXML	.plmxml	✓	✓
SOLIDWORKS	.sldasm, .sldprt	✓	✘
UniGraphics	.prt	✓	✘
VDAFS	.vda	✓	✓

An overview of the available interfaces and a list of the data formats (versions) supported when importing via native interfaces can be found here.

3-D Import

Data in the 3-D formats:

STEP (*.stp, *.step)
STL (*.stl) (the STL file must exist in the ASCII format!)
IGES (*.igs, *.iges)
VDAFS (*.vda)
CATIAV4 and CATIAV5 (*.MDL, *.Model, *.EXp, *.ISO, *.DLV3, *.CATPart, *.CATProduct)
ACIS (*.SAT)
Parasolid (*.x_t, *.xmt_txt, *.x_b)
ProE (*.prt)
Unigraphics (*.prt)
SOLIDWORKS (*.sldasm, *.sldprt)
Inventor (*.ipt, *.iam)
AutoCAD (*.dxf, *.dwg)
JT (*.jt)
PLMXML (*.plmxml)
IFC (*.ifc, *.ifczip)

can only imported as one HiCAD drawing with the Drawing > New/Open > Open > 3-D Import function. If you want to insert data in these formats to the current drawing, choose Drawing > Insert Parts > Exp. > 3-D Import. The parts (or assemblies if there are several parts) will then be inserted in the current model drawing, with the name of the selected file. Imported parts will be marked with the symbol in the ICN. If you move the cursor over the symbol, further information on the corresponding part will be displayed, e.g. the imported file format and the HiCAD version with which the part was imported.

For most 3-D formats, various setting options are available in the dialogue window before opening/saving, e.g.:

Settings made in the dialogue window for an interface format can be saved as favourites. To do this, click on the symbol in the dialogue window. You can find more information on favourites management in the in the Manage Favourites topic of the HiCAD Basics Help. You can specify which favourite is used as the default in the import dialogue in the Configuration Editor at Interfaces > Import.

To preset a favourite for a file format, just click on the symbol and choose the desired favourite.

Please also note:

When starting the import dialogue, please note that the last selected settings for the respective file format are used as default. If you have not made any changes to the settings of the favourite defined in the Configuration Editor, the favourite settings will be used.
Only 3-D elements will be read, i.e. no feature, no product data and no 2-D data.
The following conditions need to be fulfilled, as HiCAD has high accuracy standards:

All parts should have the same tolerance. Field tolerances will not be supported.
The 3-D models you want to import should have a tolerance of 1/1000. Deviations by factor 10 can be tolerated if the test (see below) has been successful.
Part names should have a maximum length of 32 characters.
Freeform surfaces must not include self-intersections within the surface.

If there are problems after reading the file, we recommend to perform a data structure check.

The import can also be done by Drag & Drop from the Explorer, in which case the import dialogue is also displayed. This dialogue is preset with the file to be imported and the corresponding options for the file format are displayed. This does not apply to the import of 3-D DXF/DWG.

3-D Export

Export model drawings

Drawing > Save/Print > Save as > 3-D formats (Step, ...)

With this function you can export the model drawing to the formats listed above. After calling the function, the corresponding export dialogue is displayed. At the top right of the dialogue window you can specify whether All parts (i.e. the entire model drawing) or a defined Selection list (i.e. a selection of marked parts) are to be exported.

Select the desired file type. The corresponding export parameters are then displayed in the dialogue window.

The default settings for the parameters in the dialogue window are defined via the settings for Interfaces in the Configuration Editor.

Further notes on export:

Alternatively, you can also access the functions via the ISD button .
When saving via 3-D formats (STEP, ...), HiCAD remembers the last saved file format (if it is a CADFix format) and offers this as default setting for the next export. Furthermore, by clicking on the symbol, the current settings can be loaded from the configuration management.
Use interface lists if you want to convert several files automatically.
When writing CATIA V5 files, a file with the extension CAT.PRODUCT is created for model drawing and a file with the extension CAT.PART is created for each part of the model drawing . If you want to transfer the export file, you must ensure that you transfer all the associated files.
Recommendation: Create a separate folder for the export. CATIA import is supported from V4 to 4.2.x and V5 to R23.
When writing PRO/E files, files with the file name extension .g are created for model drawing and for the individual parts of the model drawing . If you want to transfer the export file, you have to make sure that you really transfer all the corresponding .g files.
Recommendation: Create a separate folder for the export. PRO/E import is supported up to Wildfire 5 (included in PTC Wildfire/CREO Version 2).

Export view

RMB > 3-D Export (STEP, 3D PDF...) by views

If you only want to export the active view, use the corresponding function of the context menu for views.

Export by views is possible for the following formats:

Please note:

Only parts that are visible in the view are exported.
The export is also possible for sectional views.
For exploded views only the export by views to 3D PDF, Universal 3D, Product Representation Compact and 3DViewStation is possible. During normal export, the parts are exported in their original position.
Views of developed sheets cannot be exported.

Interfaces • Interface Lists • Macros