Part Attributes (3-D)

3-D Standard > Tools >Attr.

This function is useful if you want to create Bills of Materials (BOMs) without using the HELiOS database. You can assign a 3-D part non-graphic attributes such as quantity, item, designation or additional texts, in addition to attributes such as colour, line type or layer and material properties. You can also use this function to make parts BOM-relevant.

  1. Enter the desired additional information.
  2. If you want the part to be automatically considered for BOM creation, activate the BOM-relevant checkbox.
  3. Apply the data you have entered by clicking the OK button or ENTER (Return). Use the ESC key or the Cancel button to cancel the function without applying the changes.

The attribute mask for assemblies differs from that of other parts. It is also displayed when you create assemblies to allow you to assign non-graphic attributes, e.g. quantity, item, designation etc., directly to the assembly. The BOM-relevance is automatically set here. In addition, you can define the type of assembly in the Part type field:

etc.

 

The assembly type can be changed with the Assembly type function. Multiple selections are also possible.

 

Please note that the content of the attribute masks also depends on the specified parameter configuration (HiCAD exe directory\ParKonfigComp.exe)!

 


Notes on Attributes

  • brw_3dteilattr.hdb and brw_3ddbattr.hdb
  • brw_2dteilattr.hdb and brw_2ddbattr.hdb.

You can also assign a Usage to a 3-D part by selecting Properties > Usage. Multiple selections are also possible.

During automatic itemisation you can automatically assign the usage Girder (beam) assembly or Column assembly to Steel Engineering assemblies. For this to happen, open the Configuration Editor and set the parameter at Steel Engineering > Usage accordingly.

  • Assign usages COLUMN or BEAM (girder) automatically
    If this checkbox is active, the Girder (beam) assembly or Column assembly usage will be automatically assigned to Steel Engineering assemblies - depending on the position of the Steel Engineering main part in the assembly. The checkbox is deactivated by default.
  • Alignment for columns
    Here you select the axis for the alignment of the columns (Default: Z-axis). Beams with this alignment will be recognized as columns, beams standing perpendicular to them as girders.
  • Allowed angle deviation of beams from defined alignment (in degrees)
    This value determines up to how many degrees the axis of a beam is allowed to deviate from the axis specified at Alignment for columns parameter for the beam to be still recognized as a column (Default: 0).

 

The Part attributes masks for Steel Engineering parts and Sheet Metal parts differ from those of other 3-D parts. Furthermore, particular part attributes are automatically assigned to Steel Engineering parts, e.g. Article number, Item number, Weight, Part type, BOM-relevance (yes), etc.

 

Specific attributes can be assigned automatically to other 3-D parts, too. For example, automatic weight and surface recalculation are supported. For Sheet Metal parts, the developed lengths and widths and the sheet thickness can be entered into the attributes. This can be specified in the Configuration Editor, at Modelling > Part Properties > Weight calculation. The default setting is Only when itemising.

 

After changing the settings at Modelling > Part properties you need to restart HiCAD!

The weight calculation is also possible for main assemblies (e.g. when performing an itemisation, a feature recalculation of parts etc.). The weight of the main assembly will be assigned to the part attribute §01. (SP2)

In addition, the new attribute "Coating, one-sided" is now available for folded sheets. If it is set , the edge of the sheet will be taken into account during calculation.

The unit of measurement for surface area calculation can also be set in the Configuration Editor, at System settings > Miscellaneous > Unit of measurement for surface areas. The default setting is m**2.

 

Please note:



Useable part attributes

The part attributes used in HiCAD are managed centrally in the catalogue table "System settings - System attributes". In particular, this means:


Changeability of HiCAD part attributes for reference parts that have been write-protected via HELiOS

The changeability of HiCAD part attributes for reference parts that have been write-protected via HELiOS is influenced by the settings in the Configuration Editor (at System settings > Referencing) and in the file ref3d_attr_akt.dat (in the in the Configuration Editor at System settings > Referencing):

The table below shows, by way of the Attribute %02 (Item number), the possible settings in the Configuration Editor, and their effects on changeability of the HiCAD part attributes of assemblies and parts.

Setting for
"Synchronize item numbers / part attributes..."

Setting for "Synchronization of attributes"

Item number changeable

Part

Item number changeable

Assembly

 


Insertion of catalogue standard parts and semi-finished products

When you insert catalogue standard parts and semi-finished products (SE beams/profiles, plates) in HiCAD, values from the catalogue entry are assigned to some part attributes of the HiCAD part (e.g. the "Article number" part attribute is assigned to the "BZ" column). This configuration can be set by the user as of Version 2008. In the catalogue tables you have the option to link a table column to a part attribute.

When fitting a part from this table in HiCAD, the value of the linked column will then be assigned to the part. A user can, for instance, enter the article number and/or the supplier in a column, and the value will be assigned to a part attribute when fitting a part and can subsequently be used for part annotations or bills of materials. In the catalogue table (see Catalogue Editor) linked columns are identified by a link symbol in the column header. From version 2008 onwards, the "BZ" columns of tables for standard parts and semi-finished product are linked to the part attribute "$BB"; "CUSTOM1" columns are linked to the part attribute "CUSTOM1", and "CUSTOM2" columns are linked to the part attribute "CUSTOM2".


Insertion of parts from the CADENAS PartSolutions calalogues

When inserting parts from the Cadenas PartSolutions catalogues into HiCAD, the Cadenas attributes "Part No". and the designation will be automatically assigned to the HiCAD part attributes $BB (Article No.) and $01 (Designation 1). This assignment can be changed in the STD.XML file in the HiCAD directory SYS\CADENAS.

Example: Attribute assignment ("Mapping")

<?xml version="1.0"?>

-<AttribMap>

<Entry H="$01" C="NB"/>

<Entry H="" C="NN"/>

<Entry H="" C="LINA"/>

<Entry H="$BB" C="ARTNR"/>

</AttribMap>

In this example the Cadenas attribute NB is assigned to the HiCAD attribute $01 (Designation 1), and the Cadenas attribute ARTNR is assigned to the HiCAD attribute $BB (Article number).


Insert parts from electronic part catalogue CADClick

Parts from standard parts libraries of various producers, e.g. HILTI, can now be directly inserted in HiCAD via the electronic part catalogue CADClick.

During the insertion, the order number of the part will be transferred to the HiCAD system attribute Order No. (attribute name $ON).

If you want the order number to appear in the Part attributes mask for standard parts, you need to expand the system file BRW_3DTEIL_NORMTEIL.HDX accordingly.

Expanded BRW_3DTEIL_NORMTEIL.HDX file (detail)

 

Attribute mask with Order No. field

Process Parts via the ICNPart AnnotationItemize PartBill of Materials (BOM)

© Copyright 1994-2018, ISD Software und Systeme GmbH
Version 2302 - HiCAD 3-D
Date: 30/10/2018

> Feedback on this topic