Work with guideline
Insert part as: Main part
Default dir..: = Part dir.
Plant Engineering > Part Tools > Fit nozzle in vessel > Check setting
HiCAD opens the Plant Engineering Settings dialogue with the activated Part insertion tab.
The following setting are needed when you insert nozzles:
|
|
Work with guideline |
|
|
Insert part as: Main part |
|
|
Default dir..: = Part dir. |
The nozzles are generated as solid or hollow bodies, depending on the selected setting.
Activate the Part selection tab. In the Pre-select field, select one of the following options:
|
|
Via pre-selection mask |
|
|
Via pipe class |
|
|
Via pipe class + pre-selection mask |
Other settings, specified for the insertion of pipes in guidelines, can be retained, e.g.
|
|
Pre-set minimum pipe length |
10.00 |
|
|
Pre-set maximum pipe length |
6000.00 |
|
|
Auto-fit connection parts |
|
When you confirm the settings with OK, you are returned to the selection menu, taking you to the 3rd processing step.
Fit Nozzle in Vessel (PE) • Part Tools (PE) • Plant Engineering Functions
|
© Copyright 1994-2018, ISD Software und Systeme GmbH |
