Surface Symbols (2-D)

2-D Dimensioning + Text > Surface/Tolerances > Symbols

If you click on the arrow below Symbols, a pull-down menu with processing functions for symbols is displayed .

 

Symbols Use this function to insert symbols from symbol tables.
Pull-down menu Symbols

This function breaks up all symbols in the active part. The symbols are converted into standard 2-D parts. The symbols are then available with their graphical information for manipulations.

This function breaks up all symbols in the drawing. The symbols are converted into standard 2-D parts. The symbols are then available with their graphical information for manipulations.

This function enables you to delete symbols individually, in a rectangle or from the current drawing.

Symbol lines are polylines that any symbol uses as a line pattern. Conic sections are not permitted. After choosing the function, you can select a symbol from the symbol table as a pattern. The active polyline is assigned the selected symbol.

This function enables you to delete the symbols of the symbol lines. You obtain the original polyline.

General Information on Symbols (2-D)Define Symbol and Insert It in Symbol Table (2-D)Symbol Table (2-D)Texts in the Symbol (2-D)

© Copyright 1994-2018, ISD Software und Systeme GmbH
Version 2302 - HiCAD 2-D
Date: 14/09/2018

> Feedback on this topic