Bills of Materials (HiCAD)

To create a Bill of Materials (BOM) in HiCAD based on a drawing or an assembly, all parts to be output need to be BOM-relevant. In HiCAD there are two methods of identifying parts as BOM-relevant:

Assign part master data to the part. The part will then be automatically recognised as BOM-relevant. Please note that this is only possible if you have also installed the PDM system HELiOS .
Assign the attribute BOM-relevant to the part using the Part attributes function. For this, HELiOS will not be required.

In HiCAD you can specify the parts you want to output using the function BOM Settings (from the HiCAD Drawing tab) and the functions enabling you to specify the scope of BOM output. These functions enable you to set appropriate constraints for BOM output.

You can create BOMs for a drawing or an active part. The relevant functions, BOM for drawing and BOMs for active part+sub parts can be found in the HiCAD menu Edit as well as in the context menus for parts or the context menu of the ICN. Depending on current BOM settings, HiCAD collects the appropriate information and automatically displays it in the Report Manager.

Please note:

When creating BOMs in HiCAD, a NAME.RM3 file will be created in the current drawing directory. NAME denotes - depending on the selected BOM creation option - the name of the drawing or the selected part. If your drawing contains 2-D parts, an additional NAME.RM2 file will be created.
BOM files can be edited retroactively in the Report Manager. Start the Report Manager externally and open the RM3 file. The relevant 2-D information will be automatically loaded.
In the Structure List according to DIN, the "Quantity" value output for an item must be multiplied with the number of main assemblies, i.e. this also means that all fields multiplied with "Quantity" (e.g. total weight / surface) will respect this convention.
The INITREPMAN.DAT file in the HiCAD of the Report Manager installation (new installation is identical with HiCAD installation) can be set to specify whether the "Quantity" of an item is to be calculated according to HiCAD2 methodology or according to DIN, i.e. multiplied with the quantity values of main assemblies. Default setting is the calculation according to DIN.