Functions
Description
Pull-down menu 
Extras
The ToPS Geo interface enables the sheet development to be exported directly from HiCAD to the ToPS Geo file format. The Geo data can be loaded directly into the individual modules (laser etc.) of the ToPS family.
The active sheet part with flanges and bend zones becomes a single solid. When converting an itemized sheet to a solid, the item number and the BOM-relevance will be transferred.
Selected sheet parts with flanges and bend zones become a single solid. When converting an itemized sheet to a solid, the item number and the BOM-relevance will be transferred.
All sheet parts in the drawing are converted to solids. When converting an itemized sheet to a solid, the item number and the BOM-relevance will be transferred.
You can insert the overbend table containing the blank's bend radii and angles into the drawing. To do this, define a fitting point for the table.
The first two columns contain the bend radius ri and the bend angle alpha, which you have set for adding in the technology parameters.
The last two columns contain the values for the production of the sheet. They depend on the material.
When old sheet constructions (HiCAD 2) are loaded, a note to the effect that the old sheets are being converted is displayed. If you do not want a conversion to be performed, you can use this function to perform manual conversion of the sheets subsequently.
To do this, identify the base sheet and click OK to confirm the message "Current sheet!".
