Recalculate Feature

Recalculate
Calculate to end
Calculate to this feature
Calculate next feature

Recalculate

You use the Recalculate function to transfer all changes made in the feature log to the drawing.

The position of the insertion mark is taken into account in recalculation, i.e. the recalculation is performed up to the insertion mark. If you want the recalculation to be performed up to the end of the feature log, regardless of the insertion mark, choose the Calculate to the End function.

Changed features which have not yet been taken into account in recalculation are marked with an asterisk.

If you have chosen the Calculate feature directly after change setting in the feature configuration, the changes are automatically transferred to the drawing.

Note: Call the Recalculate function regularly, as this will enable you to check whether the feature model has saved the feature correctly and whether all parts and variants used are available.

If feature steps with element reference (point, line, hole) are changed, the log is automatically recalculated up to the feature step.

Calculate to end

This function performs the recalculation to the end of the feature log, regardless of the position of the insertion mark, which is automatically moved to the end of the log

Calculate to this feature

This function enables you to perform a recalculation up to the marked feature entry. The insertion mark is automatically placed behind the entry.

The prerequisite is for automatic recalculation to be deactivated in the feature configuration.

Calculate next feature

This function enables you to recalculate the feature log step by step.

Note:

You can achieve the same effect if you move the insertion position and have activated automatic recalculation in the feature configuration.