Process Feature

You can make changes to a feature via the feature log in the ICN. Furthermore, you can also change parameters of a geometry like height, length, radius etc. via the parametric dimensions directly in the drawing. The relevant feature is then automatically adjusted.

You use the standard Windows procedures (click, Shift-click and Ctrl-click) to select the features in the feature log that you want to process and then call the desired function.

• Change points
• Deactivate/ Activate feature
• The insertion position
• Recalculate feature
• Copy feature / Insert feature
• Move features
• Delete feature
• External References

Change points

If you have used point options when, say, fitting standard parts, the point options used and their current coordinates are listed in the feature log.

To change a point, click the point twice.... and then specify the new point.

You can make direct changes to the values of coordinates (x, y and z) from the Absolute and Relative point options. They refer to the processing plane noted in the feature log. To change a coordinate, open the pocket calculator by double-clicking the relevant entry. Then, enter the new coordinate.

The information in brackets after the Point... entry refers to the coordinate system of the log body and is purely informative.

Deactivate/ Activate feature

Logged features can be deactivated, i.e. they are not executed during construction (e.g. holes).

Deactivated features are not, however, irreversibly deleted from the feature log, but can be re-activated later.

To deactivate/activate a feature, choose the Deactivate/Activate  function from the context menu.

If the Calculate feature directly after change setting is inactive in the feature configuration, you can only flag the feature for deactivation and activation in the context menu. In this case, a

• D, for flagged for deactivation, or
• A, for flagged for activation,

appears before the feature entry in the feature log. The deactivation/activation does not then take effect until the feature is recalculated.

Move features

You can cahnge the order of features in a feature log by moving the features with Drag & Drop. You can also select several features (click features while holding down the CTRL or SHIFT key) and move them.

If the Calculate feature directly after change setting is inactive in the feature configuration, the features will initially only be pre-selected for moving. In such cases, the affected features will be marked with an asterisk *. The moving of features will only be performed after feature recalculation.

.

 Related Topics

Feature Technology: Context Menu