Referencing: Use Case 2

Itemisation and identical part search are carried out across assemblies, consecutively for the complete drawing.

This is a somewhat rare "steel engineering" case, in which the user provides the same itemisation across assemblies and also actually references the individual parts. What is crucial here is that itemisation - and hence also the identical part grouping in the parts list - should be performed across assemblies. In other words, if a part, e.g. a front plate, has been defined multiply in different assemblies in the drawing, e.g. welding frame, the part should keep the same item number everywhere.

Recommendation

In the Configuration Editor, select System settings > Referencing and set the parameter

Synchronize item numbers/part attributes when updating file

to For main parts and sub-parts .

The item numbers and all part attributes will then always be adjusted when referenced parts are updated. This applies irrespective of the assembly or construction in which the part is contained.

Notes:

• If the part attributes are changed in this setting, the part or the superordinate part are not currently marked as changed. To perform the adjustment, you still need to use the Referencing functions to save the changed part.
• In the Update identical parts of active part function, the prompt for updating the attributes is not displayed, as, according to the selected setting, adjustment is performed generally.

Referencing: Use Case 1 (3-D) • Specific Adjustment of Attributes (3-D)