Bores and Threads
Through hole threads
3-D Standard > New > Extruded 
> 2-D->3-D Conversion > Through hole thread
Use the Through hole thread function to transfer threaded 2-D holes to the 3-D model. Please note that the thread diameter must correspond to current thread standards!
- Identify the 3-D model.
- Select in the 2-D views the threads you want to transfer. Please make sure that you identify the thread and not the through hole.
- Right-click to end the selection of the threads. The 3-D model will automatically be adapted.
Through holes
3-D Standard > New > Extruded > 2-D->3-D Conversion > Through holes
The Through holes function enables you to directly transfer hole contours from the 2-D views to the 3-D model, as you would do when using the Holes function. When using this function, each hole is provided with an additional crosshairs.
Blind hole threads
3-D Standard > New > Extruded > 2-D->3-D Conversion > Blind hole thread
Use the Blind hole thread function to transfer blind holes from the 2-D views to the 3-D model. Please remember that the thread diameter must correspond to current thread standards!
- Identify the 3-D model.
- Select in the 2-D views the contour of the blind hole.
- Identify the start edge, the hole end and the thread end.
- Right-click to end the contour selection. The 3-D model will automatically be adapted.
