Repeated Insertion of Standard Parts
Various standard parts and standard processings, e.g. fasteners or threads, allow you to insert the selected standard part repeatedly. In other words, the function will not be after insertion of the part. Instead, you can insert the standard part again by specifying the next insertion position using the same settings (processing plane, fitting direction).
Alternatively, you can use the right mouse button to activate a context menu before specifying the fitting position. The functions of this menu enable you to change the fitting direction or the reference point of the standard part.
- New selection
Selects a new standard part or a new standard processing.
- Old position
If you have changed the reference point of a standard part, the standard part is positioned so that the new reference point lies in the original fitting position (only active when processing standard parts, not during fitting).
- New reference point
Changes the reference point, i.e. the point that is used to position the standard part.
- Rotate 90° / 180°
Rotates the standard part by 90 or 180 degrees.
- New direction
Changes the fitting direction by selecting another processing plane.
- Invert
Mirrors the standard part on the fitting plane
- Cancel
Cancels the function.
Boltings and Rivetings can also be inserted repeatedly. After calling assen sich wiederholt einbauen. This means that the New bolting/riveting 
function will not be ended automatically after insertion, but remains active, allowing you to insert further boltings or rivetings with the same settings (processing plane, bolting assignment, clamping length etc.). What can be modified, though, is the grid used for insertion.
