Project: HiCAD Dach/Wand/Fassade

Edit Element Installation

To edit installed elements, double-click the corresponding feature entry of the Element installation assembly. You can then change or delete installation elements, or add new ones.

The Element installation dialogue window ill then be displayed. In the model drawing the still empty areas of the installation sketch, i.e. the areas where elements can still be placed, are shown in light orange. The dark orange areas are already occupied.

If the same settings apply to all already installed elements, these will be shown in the dialogue window. If the settings differ, the text <Different values> will be shown in the corresponding input field of the dialogue window.

You can select the different editing options without closing the Element installation dialogue window. All changes will only be applied after closing the window with OK or Reset.

Please note the following:

When you edit the element installation, no complete recalculation will be performed, but only the installation element that you selected for editing will be recalculated. For instance, if you have processed parts of an installation element with functions outside the Element Installation module, e.g. moved, deleted or drilled them, and this installation element is not changed (e.g. through selection of a different variant or parameter changes), these parts will remain moved, deleted or drilled.
If a variant has been used for the first time in an element installation, - whether during its creation or subsequent editing - it will be "frozen" for this element installation, i.e. in this element installation it will only be used in this state. Moreover, this means that:
during recalculation of the element installation this state will still be used, even if a newer state of the variant exists in the catalogue.
if this variant is selected for a previously free or differently occupied sketch area, the "frozen" state will be used as well.

If you do not want this behaviour, click Create newinstead of OK. If the dialogue window will be closed by clicking Create new , the following will happen:

All selected installation elements will be recalculated based on the specified parameters. In the process, deleted or moved parts of the installation elements will be restored.
"Frozen" variants will be updated, i.e. the variants will be adjusted to current state in the catalogue.
Dimensions and all additional processings on the parts will be lost.

An example:

In the image below the two top fields and the bottom left field of the sketch have been occupied. The variant ALUCOBOND riveted has been chosen for the fields (1) and (2), and the variant ALUCOBOND Tray panel SZ-20 (with accessories) for the field (3) - each one with the default parameters. Then, the installation element ALUCOBOND_SZ20 (3) has been drilled and moved.

Now, the editing of the element installation via the Feature log can be started: The three marked elements are assigned the variant ALUCOBOND Tray panel SZ-20 - without changing any parameters. This means that nothing has changed for the installation element (3).

If the dialogue window is now closed with OK, only the installation elements (1) and (2) will be recalculated, while the displacement and the bore in installation element (3) remain.

If the dialogue window is closed with Create new, all installation elements will be recalculated. Installation element will be reset to its previous position, its bore will be removed.

Click Cancel to discard all inputs and close the dialogue window.

If installation elements are referenced, the Element installation feature will be deleted. This means that an editing via the Element installation dialogue window will no longer be possible.

Delete installation elements

To delete installation elements, select the elements with the cursor. The selected elements will be highlighted and can then be deleted with a click on the symbol.

You have the following option to select the elements you want to delete:

If you want to delete all highlighted installation elements after calling the dialogue window, a click on the will suffice.
You can also mark several elements at once: You can
right-click, choose the Select in rectangle function and, while holding down the left mouse button, draw a rectangle around the elements to be deleted, or
while holding down the CTRL key and the left mouse button, immediately draw a rectangle around the elements to be deleted, or
while holding down the CTRL key, identify the elements you want to delete with a left-click.

In the preview the elements will be immediately deleted by clicking the symbols. However, the actual deletion will only take place after confirming with OK.

Please note:

When you delete all installation elements, the Element installation assembly will be preserved.
If you want to delete entire element installation drawing - including the Element installation assembly - you can right-click on the corresponding feature entry and choose Delete.

Add or change installation elements

If you want to place elements on still empty parts of the element installation sketch, or change already existing installation elements, proceed as described in the Element Installation: Basic Procedures topic.

Choose the desired sketch areas and specify the required settings. To select the elements, proceed as described in the Element Installation: Basic Procedures topic.

Example

We will use the example from the Element Installation: Basic Procedures topic here. Let us assume that you want to change the installation elements of the dark blue areas (1) - (8): Instead of the standard design you want to use the window connection.