Project: Steel Engineering Drawing Management (BIM-PDM)

Change Detail of a Mounting/Customer Drawing 

Management + BIM > Mounting/customer drawings > Detail

Use this function to subsequently change details of mounting and customer drawings that were created with the Management + BIM module.

When you call the function, a dialogue window with a list of the mounting and customer drawings belonging to the model drawing will be displayed.

To change a detail of a mounting/customer drawing or to delete boxes, first choose the desired drawing in the displayed list (1). Then, choose the desired function in the context menu (2).

After closing the dialogue window with OK the changes will be applied. To update the corresponding mounting and customer drawings, the model must be itemized and saved beforehand. If you have changed only customer drawings, saving of the model drawing will suffice.

Then, choose Automatically update... and select the desired mounting/customer drawings in the displayed list.

If you delete boxes in a mounting/customer drawing, the associated mounting/customer plan will be removed from HELiOS, too. In this case the Update drawing function will not be required.

An example:

The image below shows the selected detail and the customer drawing derived from it:

In the next image the chosen detail has been changed, and the customer drawing has been updated accordingly:

Please note:

• If you right-click on a list entry in the dialogue window, the current settings of the drawings will be displayed. They serve information purposes only and cannot be changed here.
• Already released (and, therefore, locked) drawings cannot be modified with this functions. In this case the following message will be displayed:

After clicking OK, a list of the corresponding drawings will be displayed.

Overview of Functions (ManBIM) • Requirements for a Smooth Operation (ManBIM) • Pre-planning of the Construction Process (ManBIM) • Examples (ManBIM)  • Mounting Drawings