Process Corners (PE)

• Fillet entire guideline
• Fillet corner
• Cut off corner

Fillet entire guideline  

Plant Engineering > Guideline Tools > Guide. > Fillet entire guideline

Use this function to fillet all corners of a guideline.

Specify the desired arc radius for the fillet.

You should only use this function if you want to place bent pipes onto circular arcs of composite edges.

Fillet corner 

Plant Engineering > Guideline Tools > Guide. > Fillet corner

Use this function to round ("fillet") the edges of a guideline.

1. Specify the required arc radius for the fillet.
2. Use the cursor to select an edge near the corner that should be filleted.

You should only use this function if you want to place bent pipes onto circular arcs of composite edges.

Cut off corner 

Plant Engineering > Guideline Tools > Guide. > Cut off corner

Use this function to replace the corner point of a guideline connecting two edges by another edge. Two new corner points are created in the process.

(1) Corner to be cut off, (2) Beginning of leg, (3) Angle, (4) New second corner point

1. Identify the corner to be cut off (1).
2. Determine the beginning of the leg (2) on the edge.
3. Enter the angle (3) to the leg.

Guideline Tools (PE) • Plant Engineering Functions • Bent Pipes on Guidelines (PE)