Prism

3-D Standard > New > Solid primitive > Prism

You use this function to create a regular straight prism either as a solid body or a hollow body. Enter the part name. Activate or deactivate the Reference, Feature and BOM-relevant checkboxes.

Choose the Type of insertion: Either via preview or Via points (activate checkbox).

Then, enter the required parameters.

Enter the article number and specify, by activating or deactivating the relevant checkboxes, whether:

• the part is to be inserted as main part or sub-part of the active part,
• the part is to be referenced,
• a feature is to be created for the part, and
• the part is to be BOM-relevant.

If you have chosen the insertion type "via preview" (= Via points), specify the fitting position of the prism in the drawing. The fitting point is the centre of the circumcircle of the base surface.

If you have chosen the insertion type Via points , define the height by specifying the start and end points of the axis, e.g. Absolute (0,0,0) and (0,0,500).

Hollow prism: (1) Height (2) Number of corners (3) Radius (4) Wall thickness (5) Fitting position

Notes:

• The corner radius is the radius of the circumcircle.

• In the case of an even number of corners, you can also enter the width across flats instead of the radius.

Primitive Solids (3-D) • Part Creation Functions (3-D)