Derived Drawing: Change Settings (3-D SE)

Drawing > Itemisation/Detailing > Derive > Change settings...

Use the functions of this menu to subsequently change the settings of an existing workshop drawing.

Function	Parameters
	Active drawing sheet	Horizontal and vertical distances between view groups of the active sheet Drawing sheet layout - user-defined or DIN format Insertion of an appropriate drawing frame (only for DIN formats) Scale adjustment (for DIN formats) yes/no
	Active view group	Horizontal and vertical distances between the views of the active view group Scale of the views Visualisation of standard views, sectional views and axonometric views Shortening of profiles in axonometric views Insert BOM in view group (only for assemblies) Frame of the view group Click the desired button in the Views to be created for area to determine the parts or assemblies for which you want to create views.
	Active view	Type of dimensioning Beam annotations yes/no and position of beam annotations Beam shortenings Designations in active view Show/hide system axes Show/hide part environment (adjacent parts)

Function

Parameters

Active drawing sheet

Horizontal and vertical distances between view groups of the active sheet
Drawing sheet layout - user-defined or DIN format
Insertion of an appropriate drawing frame (only for DIN formats)
Scale adjustment (for DIN formats) yes/no

Active view group

Horizontal and vertical distances between the views of the active view group
Scale of the views
Visualisation of standard views, sectional views and axonometric views
Shortening of profiles in axonometric views
Insert BOM in view group (only for assemblies)
Frame of the view group

Click the desired button in the Views to be created for area to determine the parts or assemblies for which you want to create views.

Active view

Type of dimensioning
Beam annotations yes/no and position of beam annotations
Beam shortenings
Designations in active view
Show/hide system axes
Show/hide part environment (adjacent parts)

Please note the following:

When adding view groups to sheets that already contain views from derived drawings, it is now possible to switch off the automatic rearranging of views. You specify this setting via the Configuration Editor. Select GENERAL > DRAWINGS > CREATE > REARRANGE EXISTING VIEWS WHEN ADDING VIEW GROUPS to change the setting. The default setting is 2, i.e. you will be asked whether you want the views to be rearranged.

If you do not want to rearrange the existing views, the new view groups will be arranged below the existing view groups together with their view frames, if any (the principle is the same as for page breaks that are automatically applied as soon as the selected drawing frame or the maximum available space drawing frame is occupied, and added view groups need to be arranged i a different way).