Itemisation (3-D SE)

Drawing > Itemisation/Detailing > Auto

The itemisation of parts, i.e. the assigning of item numbers to them, is a prerequisite for the creation of workshop drawings and Bills of Materials.

Use the Itemisation function to automatically assign item numbers to all BOM-relevant parts, using the settings defined under Change parameters.

Clicking opens a menu with further functions.

	Itemisation Automatically assigns item numbers to Steel Engineering parts, using the settings defined via Change parameters.
	Itemisation,with options Queries the parameter settings and then assigns the item numbers.
	Itemisation, individual parts Assigns item numbers to individual parts. Identify the part. Specify the item number. If you want to check whether the item number already exists, activate the Check conflicts with existing item numbers checkbox . If you want to itemise identical parts of the active part as well, activate the Also itemise all identical parts checkbox . If the active part already has an item number, it will be shown to you for modification. It will also be shown whether there are identical parts with this number.
	Change parameters Changes the default settings for itemisation.
	Information, Select parts with same item number Finds and selects all parts that have the same item number as the identified part.
	Information, Select part with specified item number Finds and selects all parts with a specified item number.
	Delete item numbers, Part Deletes the item number of individual parts. Item numbers of the sub-parts of identified part are retained.
	Delete item numbers, Part+Sub-parts Deletes the item numbers of individual parts. The item numbers of the sub-parts of an identified part are also deleted.
	Delete item numbers, All Deletes all item numbers of all steel engineering parts.

Please note:

Designation tags for sub-parts, bores and connections which are located on the reverse side of the main beam can now be identified by means of another line type. The setting is defined in the file STAB3DPAR.DAT (HiCAD SYS directory). The default setting in each case is 3..

Treatment of sub-parts/bores/connections in back side of main-profile:

Linetype(0-10) of designation tags of sub-part (0=default linetype, 1=continuous line)

3

Linetype(0-10) of designation tags of bores (0=default linietype, 1=continuous line)

3

Linetype(0-10) of designation tags of connections (0=default linetype, 1=continuous line)

3

During itemisation, the decimal places of the angle value in the part attribute Zuschnittsymbolik (symbolic cuts representation) are detected depending on the settings in the STB_PARAMETER.DAT file. For this purpose, the following entry is available:

---> Cutting diagram: - ---> Schnittschema:
===================== =============
Number of decimal places for angle of intersection data (0...6): - Anzahl der Nachkommastellen für Schnittwinkelangaben (0...6):