Fit Nozzle in Vessel - Step 2 (PE)

Plant Engineering > Part Tools > Fit nozzle in vessel > Check setting

HiCAD opens the Plant Engineering Settings dialogue with the activated Part insertion tab.

The following setting are needed when you insert nozzles:

As part directory, you select

	Parts3/1: Solid body+ Symbols if the active vessel is a solid body, and
	Parts2/1: Hollow body+ Symbols if it is a hollow body.

The nozzles are then correspondingly generated as solid or hollow bodies.

Activate the Part selection tab. In the Pre-select field, select one of the following options:

	Via pre-selection mask
	Via pipe class
	Via pipe class + pre-selection mask

Other settings, specified for the insertion of pipes in guidelines, can be retained, e.g.

When you confirm the settings with OK, you are returned to the selection menu, taking you to the 3rd processing step.