Standard Parts

2-D Part > Standard Parts 

2-D Part > Standard Processing

HiCAD makes different standards available for insertion into your construction.You can access the functions for insertion of standard parts and standard processings via the Ribbon: Select 2-D Part > Standard Parts or Standard Processings. Alternatively, you can access these functions via the context menu for parts (right-click the part).

Standard parts are always subordinated to the active part.

 

Standard Parts
	Bolts+Screws
Pull-down menu BoltScrew
	Nuts		Washers
	Pins		Studs
	Rivets		Bearings
	Feather keys		Retaining rings / Shim washers
	Slotted nuts		Adjusting rings
	Shaft seals		Springs
	Pneumatic cylinders		Hydraulic connections
	Steel Engineering		Plant Engineering
	New bolting
Pull-down menu Bolting
	Process bolting		Move bolting
	Delete bolting
	Weld seams
Pull-down menu Weld
	Hydraulics/Pneumatics symbols		Electrical Engineering symbols
	Plant Engineering symbols

 

Standard Processings
	Bores, Countersinks, Threads
Pull-down menu Bore
	Change Standard Processing
	Grooves for retaining rings		Centre holes
	Relief grooves		Feather keyways

Not all standard parts are available as 2-D standard parts and can be installed accordingly in 2-D.

HiCAD (2-D) • Part Functions (2-D)