Drawing Management > Production > BOM 
> Weld seam test protocol
Use the functions
|
|
Weld seam test protocol, Drawing |
|
|
Weld seam test protocol, Active assembly |
to output the scope of a weld seam inspection in the form of a weld seam test protocol. The protocol will contain, for each execution class and inspection category according to DIN EN 1090, the total length of the weld seams.
The test protocol can be created for the entire drawing or for the active assembly.
The following requirements must be met:
- An Execution class according to DIN EN 1090 must have been assigned to the assemblies.
- An Inspection category must have been assigned to the weld seams.
For further information, click here.
Overview of Functions (DrwMan) • Requirements for a Smooth Operation (DrwMan) • Pre-planning of the Construction Process (DrwMan) • Examples (DrwMan) • Weld seam test protocol