Mitre, Narrow Side 

Sheet Metal > Change length > Corner/Mitre > > Narrow side

Use this function to create a stepped mitre. The flanges must be located in one plane.

1. First identify the stepped flange on the longitudinal side or, with a right-click, on the front side.
2. Then identify the second flange on the front side.

The clearance defined in the Technology parameters will be considered.

 

In order to obtain a foldable flange, the step will be created with a 45° mitre. Sharper angles would prevent a neat closing of the corner.

Mitre (3-D SM)