Overview of Point Options


E	Online to nearest line/edge through point	S	Genuine intersection point
AX	Absolute X position	S2	Theoretical intersection point
AY	Absolute Y position	LU	Zoom
AZ	Absolute Z-position	FF	Perpendicular to surface (3-D)
AR	Point from X and Y position	SK	Body centroid (3-D)
VI VIS	From point I (3-D) / from point I+S (2-D)	SE	Theoretical intersection of three planes (3D)
V	From point	K	Shortened coordinates (2-D)
M2	Midpoint between 2 points	R	Relative coordinates
ZP	Centre of a polyhedral circle	W	Relative angle and distance
O	Online to edge through point	WX	Relative angle and X distance
J	Isolated point	WY	Relative angle and Y distance
SD	Intersection point 2-D/3-D lines (3-D)	FL	Perpendicular Point -> Line/Edge
M	Midpoint of a line/edge	F	Perpendicular point -> Nearest line/edge
ZD	3-D point from 2-D drawing (3-D)	G	Mirrored point
D2	Distance along contour (2-D)		Input via keyboard
PW	Point from point cloud	SP	Surface centroid
D	Distance from start of line/edge	Z	Centre
A	Absolute position	QP	Quad point
I	Snap point	L	Last point
P	Absolute angle and distance	OF	Online to surface through point (3-D)
PX	Absolute angle and X distance		Switch snap radius On/Off
PY	Absolute angle and Y distance	KF	Edge/surface intersection (3-D)
SZ	Sketch (2-D)	N	Named point
CI	Cylinder intersection point (3-D)	B	Dimensioning point
T	Tangential point	EP	Vertex of ellipse
ST	Intersection of tangents	TF	Tangent to surface
RET	Apply current cursor position	NT	Standard part point

*AP = Snappable with the Autopilot

The handling of point options in 2-D and 3-D is largely identical.