Change GE Parameters

Change Parameters

2-D Geometry > Draw > Change GE parameters

The functions enable you to assign different attributes to each graphical element.

• Line type default setting 1 solid
• Colour default setting 0 white
• Layer number default setting 1

1. Once you have activated the function, select the parameters in the input mask and choose OK to confirm.
2. Then select the identification type (Individually, In Rectangle, Polyline) of the lines.

Right-click to end the function.

---

Change parameters, Same as reference line

2-D Geometry > Draw > Parameters > Parameters, Same as reference line

You use this function to copy the line parameters of a reference line.

1. Identify the reference line.
2. Then select the identification type.
3. Identify the lines that you want to change.

Right-click to end the function.

---

Change parameters, Via GE attributes

2-D Geometry > Draw > Parameters > Parameters, Via GE attributes

You use this function to select line parameters or attributes and then change them.

1. Specify the line type, the colour and the layer for the selection.
2. Choose OK to confirm the selection of the lines.

The input mask containing the line parameters is displayed.

3. Choose the settings.
4. Choose OK to apply the new settings.

Change Graphical Element (2-D) • Geometry Functions (2-D) • New Graphical Elements (2-D)