Sketch Tools
Sketch > Tools
The Tools menu provides further functions for the processing of sketches and 3-D sketches, as well as for the definition of sketch elements as auxiliary geometries.
If you click the 
icon, the Sort GE in active sketch function will be activated. This function ensures that optically
contiguous polylines of the active sketch are also regarded as such
in the internal data structure.
Clicking 
opens a menu with further functions.
|
Tools, Composite edges |
|
|
|
Mark 3-D edges Marks all composite edges of the active part. The individual edges of a composite edge are marked alternately in colour here. The orientation of each composite edge is marked by means of an arrow. |
|
|
Show 3-D edge sequence Shows the sequence and orientation of all composite edges of the active part. Once you have activated the function, the first composite edge that is found is marked and the orientation indicated by means of an arrow. For further composite edges to be displayed, choose Yes to confirm the prompt. |
|
|
Change 3-D c-edge orientation Changes the orientation of a composite edge by identifying the composite edge near the new start point. If you have selected a c-edge block here, the New orientation menu is displayed. |
|
Change sequence |
|
|
|
Change edge sequence of c-edge, individual Changes the sequence of the c-edges in the active sketch by identifying the composite edges in the desired order. The first identified composite edge is assigned number 1, the second number 2 etc. |
|
|
Invert edge sequence of c-edge Inverts the sequence. |
|
|
Swap sequence of 2 edges in c-edge Swaps two c-edges. |
|
Other functions |
|
|
|
Use this function to define sketch elements as auxiliary geometries. |
|
|
HiCAD automatically assigns a purpose to planar sketches upon their creation. One distinguishes between
Sketches with the purpose Create/Edit are, in principle, "auxiliary elements" from which other parts, processings and sectional views, detail views or cut-outs. Sketches with this purpose are visualized with broader lines in the active view. They are also visible in shaded models. Sketches with the purpose Part are regarded as "normal" parts that are used as elements of the drawing. |
