Project: HiCAD Steel Engineering

Tensioning Elements + Turnbuckles

TGT tensioning element

Steel Engineering > CAids > Bolting > TGT tensioning element

You use this function to insert tensioning elements.

Fitting is performed in the same way as for the Welding end function.

Turnbuckles

Steel Engineering > CAids > Bolting > Turnbuckles ,

You can use a turnbuckle, for example, to tension cables. Turnbuckles can be fitted in HiCAD with or without welding ends. The following turnbuckles are available:

To fit a turnbuckle, proceed as follows:

1. Define a processing plane parallel to the cross-section.
2. Call the function.
3. Choose the turnbuckle type, the size and the material.
4. Click OK to exit the selection window.
5. Next, define the fitting position.

The turnbuckle is fitted perpendicular to the processing plane.

Further Connections + Construction Aids (3-D SE) • Steel Engineering Functions • General Information (3-D SE)

Data protection • Terms and Conditions • Cookies • Contact • Legal notes and Disclaimer