DXF/DWG Settings
Drawing > New/Open > Open 
> Settings
Drawing > Save/Print... > Save as... > DXF/DWG Settings
The functions of this menu enable you to set parameter values for the import and export of DXF files.
|
Import |
Export |
|
||
|---|---|---|---|---|
|
|
|
|
DAT |
Choose this function if you want to use the conversion file HCADACAD.DAT for the export. |
|
|
|
|
DA1, DA2, DA3 |
You can use these functions to select customer-specific conversion files for the conversion. For example, if you choose function DA1, the conversion file HCADACAD.DA1 is used for the export. |
|
|
Scale |
|
|
Use this function to set the scale with which a DXF file should be conversion into a HiCAD drawing. The DXF file is then converted in the given scale. |
|
|
Unit of measurement |
|
|
This function enables you to set the dimension unit with which a DXF file should be conversion into a HiCAD drawing. The DXF file in then converted according to the given dimension unit. |
The conversion file can also be selected when importing DXF/DWG files. The selection is done directly in the import dialog. For example, if DA1 is selected, the conversion file ACADHCAD.DA1 is used.
2-D Interfaces • The HCADACAD.DAT File • The ACADHCAD.DAT File