Change Parameters: Standard Parts
You can also use the feature log to change the parameters of a standard process. For example, you can use a variable instead of a value or choose another grid for the hole pattern. You cannot, however, change the construction form, e.g. exchange a countersink for a hole.
You can make the following changes to the feature log:
- select another standard,
- change the diameter, hole or thread depth etc.
- change the grid, i.e. change the number of standard parts in x- and y-direction
- change the distance in x- and y-direction and
- change the fitting point.
To change a parameter, open the input window by double-clicking the relevant feature entry and enter the new value.
The changes are automatically transferred to the drawing if you have activated the Calculate feature directly after change setting in the feature configuration.