Geometry, Level of detail
You define the representation of the tools/processings here by activating/deactivating the relevant checkboxes.
Bore depth
Two methods are available for determining the bore depth:
To next surface: The bore is generated to the next sheet of the part.
Through: The bore runs completely through the active flanges of a Sheet Metal main part.
Please note:
The Through option is not possible for the insertion of Threads (3-D Standard > Standard Processings > Bore/Thr.).
Reference plane for bore depth/Countersink depth
This setting is not relevant to punching.
When inserting a blind hole into, say, a thread, you can specify a reference plane for the bore depth. You can choose between the entry surface (of the existing thread) and the current processing plane.
Fitting mode
You define the plane for the fitting here.
Prompt for processing plane: Before inserting a tool/processing, you are prompted to identify a processing plane.
Active processing plane: The active processing plane is used. If no processing plane is active, fitting is performed perpendicular to the xy-plane of the active coordinate system.
Suppress window
If you do not want to show these settings any more, activate the checkbox.
To display the window, activate the 3-D Standard tab and select the Standard Processings > Bore
> Settings.
