Fit Nozzle in Vessel - Step 2

Plant Engineering > Part Tools > Fit nozzle in vessel > Check setting

HiCAD opens the Plant Engineering Settings dialogue with the activated Part insertion tab.

The following setting are needed when you insert nozzles:

	Work with guideline
	Insert part as: Main part
	Default dir..: = Part dir.

The nozzles are generated as solid or hollow bodies, depending on the selected setting.

Activate the Part selection tab. In the Pre-select field, select one of the following options:

	Via pre-selection mask
	Via pipe class
	Via pipe class + pre-selection mask

Other settings, specified for the insertion of pipes in guidelines, can be retained, e.g.

	Pre-set minimum pipe length	10.00
	Pre-set maximum pipe length	6000.00
	Auto-fit connection parts

When you confirm the settings with OK, you are returned to the selection menu, taking you to the 3rd processing step.

Fit Nozzle in Vessel (PE) • Part Tools (PE) • Plant Engineering Functions