Function
Description
Example
Pull-down:
Fillet corner, via 2 GE
These two functions enable you to identify the corner to be filleted after entering the radius. Depending on which function you choose, you identify the corner via 2 graphic elements or with the cursor at the internal side.
You use this function to fillet the corners of a polyline. The elements here can consist of different line types.
Pull-down:
Chamfer, 45° 2 GE
These functions use a distance to be specified to create a 45° chamfer. Depending on which function you choose, you can now select 2 graphical elements for the corner after entering the length of the chamfer or identify the corner at the internal side with the cursor.
Pull-down:
Chamfer corner, Length + Angle
Chamfer, Length + Angle, 2 GE
This function enables you to create a chamfer with any angle and any chamfer length.
- Specify the chamfer length and the chamfer angle.
If you have chosen the Chamfer, Length + Angle, 2 GE function, you can also select the corner via 2 graphical elements.
- Identify the corners to be chamfered.
The identification point defines the position of the chamfer. The length is marked off first, then the angle.
Pull-down:
In this function, you define a chamfer by specifying the chamfer length on the two sides.
- Specify the chamfer lengths.
- Then identify the corners to be chamfered from the internal side.
