Project: HiCAD 2-D

Polyline

2-D Geometry> Draw > Polyline

A Polyline is a structurally connected sequence of individual lines. The start point of the subsequent line coincides with the end point of the preceding line.

The Polyline functions in the pull-down menu enable you to

redraw graphical elements,
interrupt and continue graphical elements,
sketch graphical elements or
define the parameters.

Function		Description
	Sketch polyline	You use this function to switch to sketch technology. This technology facilitates construction by means of auxiliary lines that automatically appear, along a predefined grid with corresponding angle, distances and radii at the cursor.
	Pull-down menu Polyline
	Polyline	The Polyline function enables you to draw new polylines. Enter the start point and then the succeeding points of the polyline. End the polyline by clicking the middle mouse button. Right-click to interrupt the polyline, and activate the following functions.
	Continue polyline	The Continue polyline function identifies the point that was constructed last.

New Graphical Elements (2-D) • Settings (2-D) • Sketch Technology (2-D)

> Feedback on this topic

Data protection • Terms and Conditions • Cookies • Contact • Legal notes and Disclaimer