symbol. Project: Configuration Management
The settings from the file ABWCOL.DAT have been moved to the Configuration Editor (ISDConfigEditor.exe). The list below shows you where to find the entries from the .DAT file in the Configuration Editor (Key name). Due to the constant further development of HiCAD, some of the entries are no longer needed. These entries are marked with the symbol.
|
Line |
Description in ABWCOL.DAT |
Key name |
|---|---|---|
|
1 |
1. Blech: Schicht,Farbe,Staerke,Art abcbh 1011 |
|
|
3 |
Farbe 2: Bogen aussen abcba 1011 |
|
|
5 |
Farbe 3: Mitte Bogen aussen abcma 1011 |
|
|
7 |
Farbe 4: Bogen innen abcbi 11 |
|
|
9 |
Farbe 5: Mitte Bogen innen abcmi 11 |
|
|
11 |
Farbe 6: Farbe 2D-Abwicklung abcab 1011 |
Compatibility > 2dDevelopment > LineProperties > abcab_layer Compatibility > 2dDevelopment > LineProperties > abcab_color Compatibility > 2dDevelopment > LineProperties > abcab_type |
|
13 |
Farbe 7: Farbe Biegezone abcbz 2111 |
Compatibility > 2dDevelopment > LineProperties > abcbz_layer Compatibility > 2dDevelopment > LineProperties > abcbz_color Compatibility > 2dDevelopment > LineProperties > abcbz_type |
|
15 |
Farbe 8: Farbe Biegelinie abcbl 2411 |
Compatibility > 2dDevelopment > LineProperties > abcbl_layer Compatibility > 2dDevelopment > LineProperties > abcbl_color Compatibility > 2dDevelopment > LineProperties > abcbl_type |
|
17 |
Farbe 9: Farbe strichliert abcst 2413 |
Compatibility > 2dDevelopment > LineProperties > abcst_layer Compatibility > 2dDevelopment > LineProperties > abcst_color Compatibility > 2dDevelopment > LineProperties > abcst_type |
|
19 |
Farbe 9: Farbe 3D-ABW abcol 401 1411 |
|
|
21 |
Farbe 10: Achsenmittelkreuze abmit 32414 |
|
|
23 |
Farbe 11: Stempel abste 32011 |
Compatibility > 2dDevelopment > LineProperties > abste_layer Compatibility > 2dDevelopment > LineProperties > abste_color Compatibility > 2dDevelopment > LineProperties > abste_type |
|
25 |
Farbe Biegetexte abtco 5 |
Compatibility > 2dDevelopment > LineProperties > abtco |
|
27 |
Texthoehe Biegetexte abtho 3.5 |
Compatibility > 2dDevelopment > LineProperties > abtho |
|
29 |
Textfont Biegetexte abtfo 2 |
Compatibility > 2dDevelopment > LineProperties > abtfo |
|
31 |
Farbe 12: Umformkanten abcfo 32511 |
Compatibility > 2dDevelopment > LineProperties > abcfo_layer Compatibility > 2dDevelopment > LineProperties > abcfo_color Compatibility > 2dDevelopment > LineProperties > abcfo_type |
|
33 |
Schicht Biegetexte abtsc 2 |
Compatibility > 2dDevelopment > LineProperties > abtsc |
|
35 |
Farbe Werkzeugnummer abwco 5 |
Compatibility > 2dDevelopment > LineProperties > abwco |
|
37 |
Texthoehe Werkzeugnummer abwho 3.5 |
Compatibility > 2dDevelopment > LineProperties > abwho |
|
39 |
Textfont Werkzeugnummer abwfo 2 |
|
|
41 |
Schicht Werkzeugnummer abwsc 3 |
Compatibility > 2dDevelopment > LineProperties > abwsc |
|
43 |
Farbe Praegungen (-1 --> wie Stempel) (abwcz) -1 |
Compatibility > 2dDevelopment > LineProperties > abwcz |
|
45 |
Schicht,Farbe,Staerke,Art der Beschichtungsseite des 2D-Blechschnittes (abbes) 2413 |
|
|
47 |
Darstellung Biegelinie 0=durchgezogen, 1= pos. Winkel verkuerzt, 2= neg.Winkel verkuerzt, 3= alle Winkel verkuerzt (abrep) 0 |
Compatibility > 2dDevelopment > LineProperties > abrep |
|
49 |
Abstand von Rand positive Winkel (abwdp) 2.0 |
Compatibility > 2dDevelopment > LineProperties > abwdp |
|
51 |
Abstand vom Rand negative Winkel (abwdn) 4.0 |
Compatibility > 2dDevelopment > LineProperties > abwdn |
|
53 |
Laenge positive Winkel (abwlp) 10.0 |
Compatibility > 2dDevelopment > LineProperties > abwip |
|
55 |
Laenge negative Winkel (abwln) 5.0 |
Compatibility > 2dDevelopment > LineProperties > abtwin |
|
57 |
Farbe der gefasten Kanten in der 2D-Abwicklung (-1 = wie Umriss) (abgfk) 1 |
Compatibility > 2dDevelopment > LineProperties > abgfk |
|
59 |
Biegelinienfarbe soll in Abhängigkeit vom Biegewinkel gesetzt werden; Datei "sys/abwcol_bend_angle.dat" (1: Eigenschaften aus Datei lesen; 0: nicht aus Datei) (abang) 0 |
Compatibility > 2dDevelopment > LineProperties > ahang |
|
61 |
Kanteneigenschaften für Aufreißkanten beim analytischen Abwickeln; Schicht (0-999), Farbe(0-9), Stärke(0-9), Art(0-9); < 0:Kanteneigenschaften von Aufreißkanten werden nicht gesetzt -1011 |
Compatibility > 2dDevelopment > LineProperties > snatchingproperty_layer Compatibility > 2dDevelopment > LineProperties > snatchingproperty_color Compatibility > 2dDevelopment > LineProperties > snatchingproperty_type |
|
© Copyright 1994-2019, ISD Software und Systeme GmbH |