Project: HiCAD P+ID

Print Project

P+ID > P+ID Project > Print project

This function enables you to print/plot all or selected sheets belonging to the current project. A slightly modified version of the dialogue box used for the Load sheet function is displayed.

• Click List to create a list of all sheets belonging to a project, or enter the criteria that should be fulfilled by sheets included in the list, and click OK.
• Click Entire list, if you want to print all sheets, or select the designation of the sheets you want to print in the Sheet column and then click OK.

HiCAD then loads the first sheet selected, whereby the setting specified for layers via Settings > Basic settings > General > Visualisation apply. Before the listed sheets are processed the Print HPGL menu is displayed.

Specify the required settings (please also see the HiCAD Basics Online Help) and confirm with OK.

HiCAD now loads selected sheets in sequence and prints them.

Please note:

RPA files can be printed from the HELiOS Desktop (e.g. via the context menu for documents). You can select a sheet, and then send the print job to the HiCAD Spooler for printout..

For this to happen, Version 2002 of HELiOS and HiCAD must have been installed. The Spooler requires an P+ID license.

Project Management (P+ID)