Project: HiCAD Feature Technology
You use the Recalculate function to transfer all changes made in the feature log to the drawing.
The position of the insertion mark 
is taken into account
in recalculation, i.e. the recalculation is performed up to the insertion
mark. If you want the recalculation to be performed up to the end of the
feature log, regardless of the insertion mark, choose the Calculate to
the End function.
Changed features which have not yet been taken into account in recalculation are marked with an asterisk.
If you have chosen the Calculate feature directly after change setting in the feature configuration, the changes will be automatically applied to the drawing, and no recalculation will be required.
Note: Call the Recalculate function regularly, as this
will enable you to check whether the feature model has saved the feature
correctly and whether all parts and variants used are available.
If feature steps with element reference (point, line, hole) are changed, the log is automatically recalculated up to the feature step.
This function performs the recalculation to the end of the feature log, regardless of the position of the insertion mark, which is automatically moved to the end of the log
This function enables you to perform a recalculation up to the marked feature entry. The insertion mark is automatically placed behind the entry.
The prerequisite is for automatic recalculation to be deactivated in the feature configuration.
This function enables you to recalculate the feature log step by step.
Note:
You can achieve the same effect if you move the insertion position and have activated automatic recalculation in the feature configuration.
|
© Copyright 1994-2019, ISD Software und Systeme GmbH |