Project: HiCAD Sheet Metal

Sheet Corner with Stiffener

Civil Engineering functions > Sheet Metal > Sheet corner with stiffener or puzzle piece > Stiffener

Use this Design Variant to create a sheet corner with or without stiffener between 2 sheet flanges. The flanges can have different lengths and different bend angles.

When you call the function the following dialogue window will be displayed:

Proceed as follows:

1. Identify the 2 sheet flanges (1) and (2), each at one of their longitudinal edges of the front surface.

If you want to identify a different flange, click the icon beneath General for its identification.

The connection will be applied to the last identified flange. If the flanges have different lengths, these will remain unchanged.

2. Enter a Clearance (3) for the corner connection.
3. Activate the Use stiffener checkbox if you want to create a riveted connection. .
4. Choose a material for the stiffener.

If you select a semi-finished product here, the Thickness (4) of the sheet will be automatically entered here. The standard for semi-finished products can be taken from the Catalogue Editor with a click on the icon. With a double-click on the Sheet corner feature you can activate or deactivate the semi-finished product later.

5. Select the riveted connection from the catalogue.

You can choose between SFS and Titgemeyer.

6. Click OK to confirm your selections.

After entering all required data you can create the connection. Click Preview to check and, if required, modify the connection. If you click Apply, the sheet corner will be created, and the dialogue window remains open, allowing you to change the data or to switch to the Puzzle piece sub-variant. the data to other sheet corners. If you click OK,the connection will be created, and the window will be closed. Clicking Cancel closes the dialogue window and discards the data without creating the connection.

Please note:

Incorrect inputs are marked with this symbol . When you move the cursor over the symbol an error message will be displayed:

If the function cannot be executed with the entered data, this symbol will appear at the OK button. When you move the cursor over the symbol an error message will be displayed:

Example:

Double-clicking the Sheet corner feature opens the dialogue window, allowing you to make changes to the connection.

Sheet corner without stiffener

Further Functions (3-D SM)