Project: HiCAD Sheet Metal

Cut Off Corner, 3 Bend Zones 

Sheet Metal > Process > Extras > Cut off corner, 3 bend zones

This function enables you to cut off a corner with 3 bend zones in your sheet construction.

1. Identify the front sides of the bend zones.
2. Specify the diameter of the subtraction in the dialogue window that appears.

The proposed diameter is based on the data of the sheets.

3. Click OK to confirm your entry.

The corner is cut off. You can now identify more bend zones or use the middle mouse button to end the function.

(1) Front edge of the first bend zone
(2) Front edge of the second bend zone
(3) Front edge of the third bend zone

Process (3-D SM) • Cut Off Corner, 2 Bend Zones (3-D SM)