3-D Part Lists (Context Menu)

Remove part from list
The part you selected last is removed from the part list.

Activate part
The part you selected last becomes the active part.

Add part to list
The part you selected last is added to the part list.

Add superordinate part to list
The part that is superordinate to the part you selected last is added to the part list.

Activate superordinate part
The part that is superordinate to the part you selected last becomes the active part.

Select all parts
All parts are included in the part list.

Do not select any parts
All parts are removed from the part list.

Part selection filter ON
The Part selection filter window is opened. You can restrict part selection by setting filters here. This applies both to selecting individual parts and to defining part lists or selecting parts in a rectangle.

Part selection filter OFF
The Part Selection Filterwindow is closed. The filter settings are not taken into account in part selection, apart from the rectangle options.

• Settings
  You define here how you want the selected parts to be highlighted in the drawing.
• If the Indicate active selection... checkbox is activated, the selected parts are highlighted in colour in the drawing.
• If the checkbox is activated and simultaneously displayed in grey, the selected parts are highlighted in colour only in shaded views.
• If the checkbox is deactivated, the parts are not highlighted in colour in the drawing.
• Press OK to apply the changes to the settings. Press Cancel to exit the menu without applying the changes to the settings.
• If you want to exit the Multiple selection context menu, left-click an area outside the menu.