Project: HiCAD Plant Engineering

Settings: P+ID Symbol Assignment

Plant Engineering > Settings > Plant Engineering Settings > P+ID symbol assignment

• Check reference to P+ID symbols
  If a link to a P+ID project exists, the 3-D parts in the layout plan contain assigned (invisible) references to the associated symbols in the P+ID. These references can be checked to see if they are valid. This action can either be carried out by selecting the Check reference to P+ID symbol function, or automatically.
  This option enables you to specify when an automatic check should be executed:
• when loading or saving the layout plan or
• when you switch from the P+ID to the layout plan.
  

• Handling of parts
  You can also specify how checks should be carried out:
• individually with confirmation, i.e. conformation for each individual part
• all with confirmation, i.e. confirmation for all parts.
• without confirmation, i.e. according to the setting specified for Type of handling, all parts are deleted or only the reference to them on the associated P+ID symbol is deleted.

Parts with references to associated P+ID symbols that have become invalid: either by because the symbol has been deleted from the P+ID or the symbol is not assigned to a part or is assigned to a different part.

Create Link to P+ID (PE) • Settings (PE)