Project: HiCAD 2-D

Chamfer Dimensioning

2-D Dimensioning + Text > Edit > Extras > Chamfer  

When dimensioning chamfers, the angle is attached to the chamfer dimension.

  1. Identify the start and end points of the chamfer.
  2. Enter the chamfer angle.
  3. Define a point for the position of the dimension figure.

(1) Chamfer start
(2) Chamfer end
(3) Position of the dimension figure

Text + Dimensioning: Extras (2-D)

© Copyright 1994-2019, ISD Software und Systeme GmbH
Version 2402 - HiCAD 2-D
Date: 06/10/2019

> Feedback on this topic