Welding Ends (3-D SE)

Steel Engineering > CAids > Bolting > Welding end

You use this function to insert welding ends - either to the left or the right. These are studs or pipe sections that have a thread at one end. This thread is welded onto a workpiece if it cannot be attached in any other way.

1. Define, if required, a processing plane parallel to the cross-section.
2. Next, call the function.
3. Select the desired welding end, the size and the type/material.
4. Click OK to exit the selection window.
5. Define the fitting position

The welding end is fitted perpendicular to the processing plane.

Further Connections + Construction Aids (3-D SE) • Steel Engineering Functions • General Information (3-D SE)