In this case general drawing frames as well as forms for terminal charts (not used in P+ID) are saved as symbols. All these symbols are of the symbol type Title block.
The names of these symbols are determined and are the same in all title block libraries.
|
Name |
Symbol Descriptions |
|---|---|
|
SFDINA0 |
Drawing frame with title block, DIN A0 |
|
SFDINA1 |
Drawing frame with title block, DIN A1 |
|
SFDINA2 |
Drawing frame with title block, DIN A2 |
|
SFDINA3 |
Drawing frame with title block, DIN A3 |
|
SFDINA4H |
Drawing frame with title block, DIN A4 portrait |
|
SFDINA4Q |
Drawing frame with title block, DIN A4 landscape |
|
SFUSER |
Title block for user defined drawing frames |
SFDINB is only required by the HICAD_SF library, it defined the drawing frames for symbol libraries. SFDINB can only be loaded in the library directory from HICAD_SF. The processing of this symbol is handled in the same way as P+ID symbols except that fitting points are not specified. In this case, the fitting point is always set on the lower left hand corner of the drawing frame.
Manage and Edit Library Symbols (P+ID) • New Library Symbol (P+ID)
|
© Copyright 1994-2018, ISD Software und Systeme GmbH |