When you process a part for which there is a feature log, the subsequent construction steps are usually always appended to the end of the current feature log.
To insert construction steps at another position in the feature log, use the cursor to move the insertion mark to the desired position. Note that then only the construction steps up to this insertion mark are also displayed in the drawing for the active part.
If you now process the part, the processing steps are entered into the feature log before the insertion mark.
To re-apply all features of the feature log to the drawing, use the cursor to move the insertion mark to the end of the feature log or activate the Calculate to end function from the context menu.
To calculate the construction step by step, choose the Calculate next feature function.
Note: Bear in mind that inserted construction steps may modify or even delete edges and parts, so that subsequent features can no longer access them and therefore fail.
Tip: Moving the Insertion position enables you to analyse the construction.
© Copyright 1994-2018, ISD Software und Systeme GmbH |