2-D
Drawing
3-D
Drawing
Main assembly
Assembly
Sketch
Dummy part
Solid
3-D Grid
Grid sub-system
Sheet Metal
Flange
Bend zone
Steel Engineering
Beam/Profile
Steel Eng. Grid
Bolting group
Metal Engineering
Metal Eng. Planning grid
Mullion group
Glazing assembly
Plant Engineering (Standard)
Branch
Vessel
Blank flange
Double knee
3-way valve
Corner valve
Flange
Flange gasket
Straight pipe
Y-pipe
Cap
Knee
Guideline
Gauges
Plant Engineering (Air ducts)
Branch base
Elbow, symmetrical
Bend transition
Offset double knee
Offset transition
Y-piece
Duct part
Pipe
Other identifiers
Externally referenced part
Referenced part, no access rights
Internally referenced part
Non-updated referenced part
Error in feature
New/changed, unsaved part
Part with HCM constraints
Assembly main part
Variant
Release article master
This symbol is displayed if the assigned article master is released and thus cannot be processed.
To prevent a processing of a part due to a locked article master, open the Configuration Editor, select System settings > Referencing and activate the checkbox for the parameter Lock parts against processing if HELiOS article master is locked. The checkbox is deactivated by default.
Checkup
This symbol is displayed when an article master is not released, yet locked for processing because the user does not have authorization to change the article master. This is for example the case when using Management+BIM and the Workflow status is set to Checkup. It could also be that the current user does not have authorization to make changes while other users do.
No database / no read permission
This symbol is displayed if a matching database does not exist or if the logged-on user has no read permission. When you disconnect from HELiOS this symbol disappears.
Identifiers for SE with Drawing Management
No database connection exists.
The drawing has not yet been saved to HELiOS, and a product structure does not yet exist.
or
The drawing contains objects that have not yet been saved to HELiOS, and the product structures in HiCAD and HELiOS are not identical.
The product structure of the current drawing is identical in HiCAD and HELiOS.
