Function Group: Reference

Drawing > Reference

Use the functions of this group to save 2-D and 3-D parts as independent files. If desired, you can directly create the corresponding detail drawing and enter the part in a factory standards catalogue or in the HELIOS database.

Functions

Reference part, Save, Detail drawing (2-D/3-D)

saves 2-D and 3-D parts as independent files

  • with or without an entry in a factory standards catalogue,
  • with or without referencing,
  • with or without database, or
  • as detail drawing.

Update referenced identical parts

Updates referenced parts and their identical parts.

Clicking opens a pull-down menu with the function

Update active part and identical part from file

Adapts the referenced part and its identical parts to the state of the corresponding KRA files.

Save referenced part

Saves the current state of a referenced part. Please make sure that the path is set correctly. The correct path is the location where the part has been placed when it was defined.

File FormatsUser InterfaceMultifunctional Toolbar (Ribbon)QuickAccess Toolbar

© Copyright 1994-2018, ISD Software und Systeme GmbH
Version 2302 - HiCAD Basics
Date: 30/10/2018

> Feedback on this topic