The insulation parts now cover the pipe parts in such a way that collisions are avoided right from the start. Please note that for complex pipelines this process may take several seconds, owing to the multitude of Boolean operations it requires. You can use the functions described below to insert insulations into your drawings:
The insulation parts now cover the pipe parts in such a way that collisions are avoided right from the start. Please note that for complex pipelines this process may take several seconds, owing to the multitude of Boolean operations it requires.
Plant Engineering > Guideline Tools > > Guide.
> Fit insulation, Guideline 
After calling the function, select the required guideline.
The Insulation, guideline dialogue window is displayed.
Specify the required settings. Select OK to take over the given settings for selected guidelines and assign the pre-determined insulation to any appropriate parts. All previously assigned insulations are deleted. The pre-determined insulation is also assigned to parts which have been inserted in the guideline later. As long as an insulation specification exists for a guideline, HiCAD ignores any specifications applying to pipelines.
Plant Engineering > Pipeline Tools > Change > Fit insulation, Pipeline 
After calling the function, select the part to which you want to assign the insulation.
The Insulation, pipeline dialogue window is displayed.
Specify the required settings. Select OK to take over the given settings for the active pipeline, and assign the pre-determined insulation to any appropriate parts. Any previously assigned insulation will be deleted. HiCAD also assigns the appropriate insulation to all subsequently inserted parts.
Plant Engineering > Part Tools > Exchange > Fit insulation, Part 
After calling the function, select the required part.
The Insulation, part dialogue window is displayed.
Specify the required settings. Select OK to take over the given settings for the selected part and assign the pre-determined insulation to all appropriate components. Any previously assigned insulation will be (partially or completely) deleted. HiCAD ignores any existing insulation specifications for a pipeline or guidelines.
Part Tools (PE) • Guideline Tools (PE) • Pipeline Tools (PE) •Insulation (PE) • Plant Engineering Functions
|
© Copyright 1994-2018, ISD Software und Systeme GmbH |