Connecting parts automatically adopt the nominal diameter of the part to which they are attached.As described in the chapter Using Connection Type Attributes, you can assign connecting elements (e.g. Flanges) to a part, via the connection attributes in its database record.
If you place such a part on a guideline, the connecting parts will automatically be fitted to Connections 1 and Connections 2 of the part.
Connecting parts automatically adopt the nominal diameter of the part to which they are attached.
Pipe Parts (PE) • Part Selection - Catalogue or Database (PE) • General Information on Pipe Parts (PE)
|
© Copyright 1994-2018, ISD Software und Systeme GmbH |