Rotate Part (PE)

Plant Engineering > Part Tools > Rotate part

Use this function to rotate a part about an axis.

Identify the required part.

Specify the rotation angle. You have the following options:

Rotation axis on connection	When you call the function, the connection surface vector on connecting point 1 is the default value. If you want to use the connection surface vector on a different connecting point, enter the appropriate number in the Rotation axis on connection field.
,	Determines whether the subsequently specified value of the angle will be positive or negative.
....	Selection of a default value for the rotation angle. Please note that the previously selected + or - sign (see above) applies here, too!
	You can enter an arbitrary rotation angle here. Confirm with OK.
Total	Total value of the entered angles (addition).
	Rotates back by the total angle. Clears the input field for the angle.
Close	Ends the function.
OK	Applies the rotation by the manually entered value. This button is only visible if you have entered a value for the rotation angle in the input field.

Click to open a pull-down menu containing the Invert fastener or bolted flange connection function.