Chamfer Dimensioning (3-D)

3-D Dimensioning + Text > Chamfer dimensions

Use this function to create chamfer dimensionings with two projection lines or an auxiliary line. The dimension figure is composed of chamfer length and chamfer angle.

Chamfer dimension, with 2 projection lines

  1. Identify the chamfer.
  2. Specify the position of the dimension line.

Chamfer dimension, Folded leader line, Horizontal dimension figure

  1. Identify the chamfer.
  2. Specify the start point of the leader line.
  3. Specify the folding point of the leader line.

Chamfer dimension, Straight leader line

  1. Identify the chamfer.
  2. Specify the start point of the leader line.
  3. Specify the end point of the leader line.

Dimensioning (3-D)Dimensioning - Procedure (3-D)

 

© Copyright 1994-2018, ISD Software und Systeme GmbH
Version 2302 - HiCAD 3-D
Date: 30/10/2018

> Feedback on this topic