2-D > 3-D, Level > Body (2-D)

3-D Standard > New > Extruded > 2-D -> 3-D Level -> Body

You use this function to transfer 2-D parts to 3-D, by evaluating the overlap level. After activating the function, you select whether you want the active part or all 2-D parts to be transferred to 3-D.

The function then works internally in two steps:

  1. The lines are converted into composite edges.
  2. Parts with overlap are automatically assigned a depth, depending on level and size.

 

The image shows three 2-D parts: Part 1 (Rectangle, Level 3) and Part 3 (Level 2) overlap Part 2 (red contour, Level 1)

Created extruded solid

 

The image shows the above 2-D parts again. Here, however, Part 2 is not overlapped by Part 1.

Created extruded part

Part Functions (2-D)

© Copyright 1994-2018, ISD Software und Systeme GmbH
Version 2302 - HiCAD 3-D
Date: 30/10/2018

> Feedback on this topic