Arc (Sketch)

Sketch > Draw > Arc

Use this function to insert circular arcs into the active sketch or 3-D sketch. The arc is created via specification of the centre point, the start point and end point.

Clicking opens a menu with further arc functions.

	Arc, CP + Radius Creates an arc via specification of the centre point, the radius, the start point and the end point of the circular plane. These points do not necessarily need to lie on the circular arc! Example
	Arc, P-P-P Creates an arc via specification of 3 points. Example
	Arc, P-P-Radius Creates an arc via definition of the start and end points and specification of the radius.
	Arc, P-P-Angle Creates an arc via definition of the start and end points and specification of the radius.
	Arc, P/GE-Radius-P/GE (no free points) Creates an arc via definition of two points or edges and specification of the radius. Example
	Arc, P/GE-P/GE-P/GE (no free points) Creates an arc, tangential to three edges or points. Example
	Circular arc, transition Creates an arc transition between 2 edges. Identify the first edge in the vicinity of its start point, and the second edge in the vicinity of the its end point. For both identification types, HiCAD uses the point information as well as the edge information (tangent information). Examples
	Transition curve Creates a curve with a moderated curvature (Hermite spline) between 2 points.

If several solutions are possible, HiCAD offers the various solutions for you to selection. Click Yes to apply the displayed solution or No to move to the next solution.

Sketch Functions (3-D) • Sketch Technology (3-D)

> Feedback on this topic